FIBREroll EW 60/90/120

Textile roller fire curtain

FIRE RESISTANCE:

E 180 / EW 120 C-0

 

 

 

CE

 manufacturer´s declaration: Declaration of performance_sample


Textile fire curtains are used to part two neighbour fire sections in case of fire. For their minimum demands, they are mostly used in underground garages, in shopping centers in combinations with safety grids, and also in industrial buildings and halls, etc.

This fire curtain is advantageous for minimum spatial requirements since under normal conditions it is coiled in a cover that is placed in such a manner not to obstruct normal operation (usually above the lower ceiling, etc.). The curtain thus does not require any larger area on the sides of the opening, as e.g. in sliding doors and gates.

The main quality required is the fire resistance of these curtains. Fire curtain FIBREroll has fire resistance up to E 180 / EW 120.


CERTIFICATION:

Fire curtain FIBREroll has been successfully tested in fire testing center FIRES s.r.o., classified as per EN 15269-11 and EN13501-2, assessed as per EN 13241+A2 and EN 16034 and is covered by CE certificate No. 1396‑CPR‑0153. / For more information, contact projekce@avaps.cz

Manufacturer issues Declaration of performance for individual orders in compliance with Regulation of the European Parliament and Council (EU) No. 305/2011.


PRODUCT DESCRIPTION:

  • Made of special fire-resistant textile 0.7 thick, reinforced by stainless steel wires with surface coating and aluminium reflecting coating (foil) to increase fire resistance.
  • Manufacturer's recommended maximum total dimensions: 16.5 m x 7 m; minimum total width: 1 m (other dimensions subject to consultation).
  • Designed for face fixing or fixing between design (possible combination of both), fixing into concrete, masonry or steel profiles with required fire resistance.
  • Standard dimension of the box (W x H) with total height up to 3,23 is 230 x 230 mm (W x H), for higher curtain the size of the box is 260 x 260 mm (W x H).
  • Very light (curtain 3 x 3 m approx. 150 kg, curtain 6 x 6 m approx. 350 kg).
  • Controlled electrically by means of a tube drive (230 V).
  • Closing speed is approximately 100 mm/s.
  • Steel parts are made from galvanized metal, standardly powder coated in RAL 9006 (white aluminium) or RAL 9010 (white), alternatively, atypical coating according to the RAL sampler possible at the customer's request.
  • Control panel AOP (AVAPS Operation Panel) including emergency closure button
    • System designed in accordance with EN 14637
    • Ensures electronic control of individual curtain functions
    • Fail safe” - safe gravity closure even in the event of a power failure, status monitoring and fault evaluation (short circuit, cabling failure, undervoltage, preload,…)
    • Fire detection options: local Fire Alarm System (potential-free contact) or local detection (3 or 6 sensors depending on the closure width)
    • Contains its own back-up power source (accumulator) to prevent unwanted closing of the curtain in case of power failure, including a cyclic charging system that extends battery life
    • According to customer requirements can be supplemented with:
      • key switch, lockable button
      • signalling of conditions to external devices
      • optical and acoustic signalling


 

AVAPS, s.r.o.
U Obalovny 488,
250 67 Klecany, Česko

+420 777 911 780
info@avaps.cz
View full map
This website uses cookies. By continuing to use this website, you consent to our use of these cookies.

Working...