FIBREroll S / S200

Textile smoke-proof fire curtain with Sa / S200 classification


EW 60-C0Sa / EW 60-C0S200






Textile roller fire curtains are used to separate two adjacent fire compartments in the event of a fire or to eliminate a fire-hazardous area while retaining openings in the perimeter shell of the object.

For cases where smoke resistance is required in addition to fire resistance, a smoke-proof fire extinguisher curtain with classification Sa / S200  has been developed according to EN 16034.

Due to their minimal space requirements, textile roller shutters can be used in cultural, educational, sports, transport, residential and office buildings, in shopping centers in combination with security grids and also in underground garages, industrial buildings, halls, etc.

Under normal circumstances, the fabric is wound in a cover that is positioned so that it does not interfere with the standard operation (usually above the ceiling). The shutter thus requires no more space on the sides of the opening, unlike sliding doors and gates.


Fire curtain FIBREroll S / S200 has been successfully tested in fire testing center FIRES s.r.o., classified as per EN 15269-11 and EN13501-2, assessed as per EN 13241+A2 and EN 16034 and is covered by CE certificate No. 1396‑CPR‑0154 (a subtype of FIBREroll). / For more information, contact

Manufacturer issues Declaration of Performance for individual orders in compliance with Regulation of the European Parliament and Council (EU) No. 305/2011.


  • Smoke-tight version of textile fire curtain FIBREroll Sa / S200 with classification Sa (smoke at ambient temperature) / S200 (smoke at ambient temperature up to 200 ° C).
  • Made of special fire-resistant textile 0.7 thick, reinforced by stainless steel wires with surface coating and aluminium reflecting coating (foil) to increase fire resistance.
  • Manufacturer's recommended maximum total dimensions: 3 x 3 m / minimum total width: 1 m (other dimensions subject to consultation).
  • Designed for face fixing or fixing between design (possible combination of both), fixing into concrete, masonry or steel profiles with required fire resistance.
  • Standard dimension of the curtain box is 230 x 230 mm (W x H).
  • Very light (curtain 3 x 3 m approx. 160 kg).
  • Controlled electrically by means of a tube drive (230 V).
  • Closing speed is approximately 100 mm/s.
  • Steel parts are made from galvanized metal, standardly powder coated in RAL 9006 (white aluminium) or RAL 9010 (white), alternatively, atypical coating according to the RAL sampler possible at the customer's request.
  • Control panel AOP (Avaps Operation Panel) including emergency closure button
    • System designed in accordance with EN 14637
    • Ensures electronic control of individual curtain functions
    • Fail safe” - safe gravity closure even in the event of a power failure, status monitoring and fault evaluation (short circuit, cabling failure, undervoltage, preload,…)
    • Fire detection options: local Fire Alarm System (potential-free contact) or local detection (3 or 6 sensors depending on the closure width)
    • Contains its own back-up power source (accumulator) to prevent unwanted closing of the curtain in case of power failure, including a cyclic charging system that extends battery life
    • According to customer requirements can be supplemented with:
      • key switch, lockable button
      • optical and acoustic signalling
      • signalling of conditions to external devices
      • emergency opening button
      • optical barriers.
AVAPS, s.r.o.
U Obalovny 488,
250 67 Klecany, Česko

+420 777 911 780
View full map
This website uses cookies. By continuing to use this website, you consent to our use of these cookies.